HTE High okpomọkụ elongation ọla kọpa foil
●Ọkpụrụkpụ: 12um 15um 18um 35um 70um 105um
●Obosara ọkọlọtọ: 1290mm, nwere ike ịcha dị ka arịrịọ nha
●Igbe igbe osisi
●Ogo ahụ dabere na GB/T5230-1995 na ọkọlọtọ IPC-4562
●NJ:76 mm, 152 mm
●Ogologo: ahaziri
●Enwere ike ịnye ihe nlele
Ụlọ ọrụ ahụ ewepụtala ọka dị mma na ọla kọpa dị elu nke ịdị ala dị ala na arụmọrụ ductibility dị elu.Nke a foil na-egosipụta nke ọma mkpụrụ ọka dị mma na ịdị elu dị elu ma nwee ike igbochi mgbawa nke nrụgide okpomọkụ na-akpata, si otú a dabara adaba n'ime ime na n'èzí nke bọọdụ multilayered.Site na ọkwa dị ala nke ịdị elu dị elu na nke ọma etchability, ọ na-emetụta maka njupụta dị elu na mkpa.Site na ike ike dị oke mma, ọ na-enyere aka melite mgbanwe ma na-etinyekarị ya na PCB multilayer yana efere flex.Site na nkwụsi ike na ike siri ike, ọ naghị adị mfe adọwa na nsọtụ ma ọ bụ mpịaji, na-eme ka ọnụego nnabata ngwaahịa dị ukwuu.
●The mesoo foil na isi awọ ma ọ bụ ọbara ọbara
●Ike bee dị elu
●Ezi etchability
●Nguzogide corrosion mara mma
●Mgbochi foil cracking site na elu elongation na elu okpomọkụ
●High elongation mgbe emeso ya na elu okpomọkụ ma ọ bụ annealing .
●Elu ihe onwunwe.
●Dị irè na mgbochi nke mgbawa efere.
●Polyimide osisi
●bọọdụ epoxy
●CEM-3, FR-4, FR-5, mkpụrụ osisi hydrocarbon
●Multilayer osisi
●Tg dị elu, enweghị ndu na enweghị halogen, Middle Tg
●Nguzogide ọnụọgụ ọkụ dị mma
| Nhazi | Nkeji | Ihe achọrọ | Usoro ule | |||||
| Ọkpụrụkpụ aha | Um | 12 | 18 | 35 | 70 | 105 | IPC-4562A | |
| Ibu Mpaghara | g/m² | 107±5 | 153±7 | 285± 10 | 585± 20 | 870±30 | IPC-TM-650 2.2.12.2 | |
| Ịdị ọcha | % | ≥99.8 | IPC-TM-650 2.3.15 | |||||
| isi ike | Akụkụ na-egbuke egbuke (Ra) | Sm | ≤0.43 | ≤0.43 | ≤0.43 | ≤0.43 | ≤0.43 | IPC-TM-650 2.3.17 |
| Akụkụ Matte (Rz) | um | ≤6 | ≤8 | ≤10 | ≤15 | ≤20 | ||
| Ike ọdụdọ | RT(23°C) | Mpa | ≥207 | ≥207 | ≥276 | ≥276 | ≥276 | IPC-TM-650 2.4.18 |
| HT (180°C) | ≥103 | ≥103 | ≥138 | ≥138 | ≥138 | |||
| Ogologo oge | RT(23°C) | % | ≥2 | ≥2 | ≥3 | ≥3 | ≥4 | IPC-TM-650 2.4.18 |
|
| HT (180°C) | ≥2 | ≥2 | ≥2 | ≥3 | ≥3 | ||
| Resistivity | Ω.g/m² | ≤0.17 | ≤0.166 | ≤0.16 | ≤0.162 | ≤0.162 | IPC-TM-650 2.5.14 | |
| Ike bee (FR-4) | N/mm | ≥0.9 | ≥1.1 | ≥1.4 | ≥2.0 | ≥2.0 | IPC-TM-650 2.4.8 | |
|
| lbs/in | ≥5.1 | ≥6.3 | ≥8.0 | ≥11.4 | ≥11.4 | ||
| Pinholes & porosity | Nọmba | No | IPC-TM-650 2.1.2 | |||||
| Anti-oxidization | RT(23°C) |
| 180 |
| ||||
| RT (200°C) |
| 40 |
| |||||
Obosara ọkọlọtọ, 1295 (± 1) mm, Oke obosara: 200-1340mm.Mee dị ka akwa akwa arịrịọ onye ahịa si dị.
Anyị na-anwale ike bee na prepreg FR-4(Tg140), biko tinyegharịa na pp gị.
